Product Introduction

TPA series self-cleaning filter (TPA Filter for short), is the high efficiency scraping self-cleaning filter removing the impurities particles on the filter element outside by mechanical scraping, it continuously filters on-line. TPA filter is designed for fine and accurate filtration ranging from20-500 micron. It can avoids extruding and breaking the impurities and is capable of the filtration for water and liquids viscosity up to 800000cps.

Products are widely used in water treatment, papermaking 、petroleum 、bio-pharmaceuticals、 printing ink, grease, food and beverage, etc.

 Main Features

■Automatic 24-hour on-line filtration, no frequent changing out and cleaning
■No disposable filter media consumption, save filter media cost and environment cost
■Stainless steel scraping blade, good impurity removing performance
■Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap
■Very low pressure drop, stable flowrate, save energy consumption
■Close filtration, no dangerout liquid leakage, good for safe production
■Discharge waste liquid with high impurity concentration, avoid valuable liquid loss

 Main technical parameter

Model	TPA11	TPA22	TPA34	TPA75	TPA100	TPA136
Filter area(cm2)	0.11	0.22	0.34	0.75	1.00	1.36
Volume (L)	16	30	50	145	195	320
Inlet/Outlet (mm)	DN40-DN50	DN50-DN80	DN50-DN100	DN65-DN100	DN80-DN125	DN100-DN150
Drain outlet (mm)	DN40		DN50
Applicable liquid	Viscidity (<800000cps)， Impurity<1000ppm
Filtration Precision	20-500μm
Cleaning pressure diff.	0.05MPa
Diff pressure switch	Differential pressure transmitter(DPT) or Differential pressure switch(DPS)
Gear motor	180W，380V, IP55
Filter element type	V-SLOT, 316L/304
Housing material	316L/304/CS
Scraping blade material	304/316L
Seal material	NBR/VITON(FKM)
Discharging valve	Pneumatic ballvalve/ Electric ball valve

 

 

 

 Product Introduction

 TPX series self-cleaning filter (TPX Filter for short), is the high efficiency scraping self-cleaning filter removing the impurities particles on the filter element outside by mechanical scraping, it continuously filters on-line. TPX filter is designed for fine and accurate filtration ranging from20-500 micron. It can avoids extruding and breaking the impurities and is capable of the filtration for water and liquids viscosity up to 800000cps.

Products are widely used in water treatment, papermaking 、petroleum 、bio-pharmaceuticals、 printing ink, grease, food and beverage, etc.

 Main Features

■Automatic 24-hour on-line filtration, no frequent changing out and cleaning
■No disposable filter media consumption, save filter media cost and environment cost
■Stainless steel scraping blade, good impurity removing performance
■Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap
■Very low pressure drop, stable flowrate, save energy consumption
■Close filtration, no dangerout liquid leakage, good for safe production
■Discharge waste liquid with high impurity concentration, avoid valuable liquid loss

Main technical parameter 

Model	TPX11	TPX22	TPX34	TPX75	TPX100	TPX136
Filter area(cm2)	0.11	0.22	0.34	0.75	1.00	1.36
Volume (L)	16	30	50	145	195	320
Inlet/Outlet (mm)	DN40-DN50	DN50-DN80	DN50-DN100	DN65-DN100	DN80-DN125	DN100-DN150
Drain outlet (mm)	DN40		DN50
Applicable liquid	Viscidity (<800000cps)，Impurity<1000ppm
Filtration Precision	20-500μm
Cleaning pressure diff.	0.05MPa
Diff pressure switch	Differential pressure transmitter(DPT) or Differential pressure switch(DPS)
Gear motor	180W，380V, IP55
Filter element type	V-SLOT, 316L/304
Housing material	316L/304/CS
Scraping blade material	304/316L
Seal material	NBR/VITON(FKM)
Discharging valve	Pneumatic ballvalve/ Electric ball valve

 

 

 

Product Introduction

 TPB filters have rigid and durable V-SLOT filter cartridge, with uniform surface crack width，single large filter area, precision filtration features, high reliability features. It applies to the filtration of dirty water containing oil sludge type impurities, soft and viscous impurities, high content impurities, small amount of hairs and fibers. It is widely used in water treatment, steel, pulp and paper, mining, petro-chemical, machining, municipal, irrigation etc.

 Main Features

1. Automatic continuous online filtration.
2. Large filtration area, low surface flow velocity and low pressure loss.
3. Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap
4. High intensity structure, high efficient backwash and time saving.
5. High reliability system, low operation cost and simple maintenance.

Main technical parameters

Model	TPB11	TPB22	TPB34	TPB75	TPB100	TPB136
Applicable liquid	Viscosity(1-40cp)
Flow rate(m³/h)	17-8000
Filtration Precision	50-2000μm
Std design P	0.6MPa, 1.0MPa(High design pressure available)
Designed temp.	0-95℃( Determined by the seal material)
Filter Element	V-SLOT
Housing material	304.316L,CS
Cleaning Start Mode	Time or Pressure Drop

 

 

Product Intorduction

Diatomite filter, also called candle type sealed filter, candle type diatomite filter, tube-type filter press, thickening filter, filter element type self-cleaning filter, cake layer filter.

Inside of the filter are many candle tubes (the tube is Wire-wrapped screen) so as to meet different requirements. There are also some filter cloths outside the tubes which aim to filter liquid and solid. After the filter process, both the filter cake’s drying discharge and the filter cloth’s cleaning could automatically run. The filter could handle large filter area because of its simple structure and no driving device.

Combined with the candle-core patented structure design, the candle type filter enables the shell residue freely discharges. The bottom of the filter doesn’t have any structure; the bottom can be manually, pneumatically and electrically slag; the slag hole is big, so it doesn’t have any effect on batch.

Advantages and Features

1. Completed enclosed filtering, no leaking and no environmental pollution.
2. Filter element design is duplex structure (internal metal mesh support plus external filter cloth), has wide application fields and good filter effect.
3. Filter element is made of food grade stainless steel wedge wire wrapped screen with high roundness and concentricity.
4. Filter completely only one time.
5. Clean and dry filter cake to obtain maximum economical benefit.
6. Gas has been used to against slag, quick ash clean, adapt to a variety of sticky materials.
7. The whole filtering process can automatically run (according to the automatic setting of pipes).

 Application Range

 Food industry: beer, sugar, glucose decolorization through active carbon filtration; fruit juices, beverages and other wines’ filtering clarification.

Chemical industry: the petrochemical industry, inorganic chemical, organic chemical’s crystal filtration and separation; various of catalyst’s filtration and separation; chemical products’ bleaching and filtration; electrolyte impurity removal; metal degreasing, slag removal and phosphate slag; chemical products’ concentration and thickening etc.

 Main Technical Parameters

 

Area m2	Barrel Diameter (mm)	Working Pressure (MPa)	Working Temperature (℃)	Nominal Filter Rating (um)
1-120	Ф219、Ф300、Ф400 Ф500、Ф600 Ф800、Ф1000 Ф1200、Ф1400 Ф1600、Ф1800Ф、2000	0.4	120	1、5、10 15、25、40 50、65、75 80 、100、120…
remark：2t/m2

Product Introduction

Activated carbon is a very fine carbon particles with great microporous in unit area, usually called capillary pore, the capillary has a strong adsorption capacity due to the surface area of the carbon particles, in full contact with impurities in water, these impurities can be adsorbed in the pores. The activated carbon filter is used for color and smell removal and get rid of colloid impurities in water.

 

It is widely used in water pretreatment of household water and food industry, chemical, power and other industries.

Features

 Easy operation, low maintenance

Effective for organic matter, oxide and metal ion

High effectiveness and compact structure

Optional mannual/automatic control

Specifications

Model No.	Flow rate (T/H)	Working Pressure	Operating Temperature	Water distributor	Material	Silica/Carbon	Column Size (mm)
TPC-8	8	0.1MPa～0.6 Mpa	Normal	(up)：(screen mesh)，(branch-center) (down)： Filter nozzle	SUS304SUS316Q235	1.3T  360KG	Φ900X1500
TPC-10	10					1.6T  450KG	Φ1000X1500
TPC-15	15					2.3T  650KG	Φ1200X1500
TPC-20	20					3T    860KG	Φ1400X1500
TPC-30	30					3.5T  1T	Φ1500X1500
TPC-35	35					4T    1.2T	Φ1600X1500
TPC-40	40					5T    1.5T	Φ1800X1500
TPC-50	50					6T    1.8T	Φ2000X1500
TPC-60	60					7.5T  2.2T	Φ2200X1500
TPC-70	70					9T   2.5T	Φ2400X1500
TPC-75	75					9.7T  2.8T	Φ2500X1500

 

 

Product introduction and working principle

The water in the filter is also called rotating decay filter, suitable for use the solid-liquid separation of industrial wastewater, can remove the dirt from the suspended particles is greater than 0.2 mm, Sewage flat cloth evenly into the inside mesh buffer water inlet into the rotating drum, through net tube and the conducting slag spiral rotate, intercept sewage through the other side discharge, the filtered water from screening drum gap discharge.

 Features and Advantages

1. Water distribution uniform increase capacity

2. Simple structure, stable running, easy maintenance, long service life

3.Use the chain transmission, high transmission efficiency

4. With reverse flushing device against the filter clogging

5. On both sides of the belt spill-proof plate to prevent the water splash

 Main technical parameters

 

Model	Tube diameter（mm）	Slot Size（mm）	Removal rate		Shape area（mm）
			Grain size >0.75mm	Grain size >037mm
TPLN-600	600	0.2-2	95%	55%	2450x1000x960
TPLN-800	800				3000x1200x1200
TPLN-1000	1000				3400x1350x1250
TPLN-1200	1200				3500x1850x1450
TPLN-1500	1500				3650x1800x1880

 

The introduction of product

 Sieve Bend Screen Filter is a small-scale unpowered separate equipment, used for processing the suspended solids, floating objects, and sediment, etc… during the sewage treatment. The material of this equipment normally adopt 304 stainless steel, and the gap can be made different size, such as 0.25mm、0.5mm、0.75mm、1.0mm、1.5mm、2mm, and so on, also can be customized available for detailed requirements.

 operating principle

The main body of Sieve Bend Screen Filter is made by wedge shape steel bar, and process as a arc or flat filter sieve of stainless steel filter flat sifter. After the sewage evenly distribute on the inclined sifter by the down flow weir.

Because of the gap of screen surface is small, smooth, and easy to drain away water, no obstruction; the solid object is retained, the water come through the gap. At the same time, under the water power, the solid object expels from the bottom of the sifting plate, then it can achieve goal for divide the solid and liquid. 

Production Features

1. Take advantage of the gravity of water flow, it has no any energy cost;

2. Water yield dispose is large by single-motor.

3. It will not obstruct, and it is easy to clean.

4. The material of whole set of equipment adopts stainless steel or carbon steel, machinery strength is very high, no deformation and has a life long service.

Typical Applicant Field

1. Paper waste--- recycles the fiber, wipe off the solid content.

2. Tannery waste---- eliminates the fur, grease and other solid contents.

3. Slaughter waste----- eliminates bag, fur, grease, shit and other solid content.

4. Urban sewage--- eliminates fur, debris and other solid contents.

5. Alcohol, starch factory waste---- eliminates the shell of plant fiber, debris and other solid contents.

6. Drug and candy factory waste--- eliminates different kinds of wastes, the shell of plant fiber, and other solid contents.

7. Beer, Malt factory waste----- eliminate malt, bean peel and other solid contents.

8. Livestock, fishing farm waste--- eliminate livestock fur, shit and other solid content.

9. Fish and meat packing plant----- to eliminate gill, scale, dog meat, grease and other solid contents. Also deal with other factories for fiber textile, chemistry, plastic process, large-scale machinery, hotel, residence.

 Technical Data

 

Model	LS-400	LS-550	LS-700	LS-1000	LS-1400	LS-1700	LS-2000	LS-2300	LS-2700
Sieve plate width (mm)	350	520	650	940	1340	1630	1920	2220	2640
Sieve plate length(mm)	900	900	950	1000	1200	1280	1350	1500	1600
Width (mm)	400	550	700	1000	1400	1700	2000	2300	2700
High (mm)	1200	1250	1300	1380	1500	1550	1650	1700	1900
Inlet (DN)	50	65	80	80	100	125	150	200	250
Outlet (DN)	80	100	125	150	200	250	300	350	250x2
Slot 0.3mm Capacity （m3/h）	10	20	45	75	100	130	180	250	310
Slot 1.0mm Capacity （m3/h）	30	50	80	110	180	220	295	360	420

Product Introduction

TPM Series modular self-cleaning filter (TPM Filter for short) is the automatic filtration system designed by TOP according to the modular design concept. Applicable industries: petrochemical industry, water treatment, papermaking etc.

 Main Features

■ Low risk of downtime, small investment.

■ Without interrupting the filtering case, can maintenance the filter unit off-line one by one.

■ Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap

■ The filter element is very convenient to remove for cleaning

■ Backflushing through the valve switching, no complicated mechanical structure, easy to maintain.

 Main technical parameters:

Model No	TPM-I Filter	TPM- I I Filter
Suitable liquid	External solution	External solution or gas
Viscosity range	<50cps	<100cps
Impurity content	<300ppm	<300ppm
Minimum inlet pressure	>0.3MPa	<0.3MPa
Installation site	after pumping	Before the pump or after
Filter fineness	50-500um	20-500um
Standard design pressure	1.6MPa,2.5MPa,4.0MPa	1.6MPa,2.5MPa,4.0MPa

 

 

Product Introduction

     TPI sodium ion exchanger is using strong acidic resin can absorb the calcium in the water、the characteristics of magnesium ions to soften water quality, Using salt aqueous solution can make its regenerative recovery principle designed

    TPI series Ion Exchanger is mainly applicable to boilers, thermal power plants, chemical, textile, pharmaceutical, biological, electronics, and atomic energy industry, pure water pre-treatment, industrial water softening, and deionized water preparation, as well as decolorization and purification of foods and drugs, recycling of precious metals and chemical raw materials, and electroplating wastewater treatment, etc.

 Main Features

1. system center used planar two patents of multi-way valve sealing technology, the body use PVC engineering plastics, corrosion resistance、long life, stable and reliable operation;
2. full automatic control: Automatic control adopts intelligent microcomputer and PLC program control, it can realize single or dual mode control time and flow regeneration. In addition to salt, full automatic working cycle process.
3. Equipment in a variety of forms: A single tank valve intermittent water production; Double tank single valve, use a case and a prepare, continuous water making; And tank valve combination, realize the intermittent or continuous water production, meet different occasions where process water;
4. Adopted floating bed countercurrent regeneration process, the output is big, processing ability, good water quality;
5. Equipment structure is compact, covers an area of less, simple installation, through in and out of the water pipes, turn on the power supply can be switched on water ;
6. Exchange of tank structure, technology and unique design; can adapt to the wide scope of water quality, high level of softening hardness of water quality(15 or less tendency for L water hardness) reached the national standard; Resin does not need to scrub in vitro, reduced the operation trouble and loss of resin;
7. Regeneration into salt, USES the sealing pressure type, pump pressure, salt pond, salt box adopted for salt, a variety of forms, convenient supplement.

 Specifications

 

Model No.	Capacity	Nominal Recovery	Nominal Salt Rejection	Working Pressure	Operating Temperature	Voltage	Weight（kg）	Size（mm*mm）
TPI-2	2T/H	65-75%	99.60%	0.4mpa	5-50℃    （ Design Temperature 25℃）	220V/380V/460V, 50-60Hz	300	Φ400×1850
TPI-4	4T/H						450	Φ500×1850
TPI-6	6T/H						480	Φ600×1850
TPI-8	8T/H						580	Φ600×2300
TPI-10	10T/H						600	Φ800×1850
TPI-12	12T/H						620	Φ800×2300
TPI-14	14T/H						750	Φ1000×2100
TPI-16	16T/H						800	Φ1200×2300