TPA Scraping Self-cleaning Filter

Product Introduction

TPA series self-cleaning filter (TPA Filter for short), is the high efficiency scraping self-cleaning filter removing the impurities particles on the filter element outside by mechanical scraping, it continuously filters on-line. TPA filter is designed for fine and accurate filtration ranging from20-500 micron. It can avoids extruding and breaking the impurities and is capable of the filtration for water and liquids viscosity up to 800000cps.

Products are widely used in water treatment, papermaking petroleum bio-pharmaceuticals printing ink, grease, food and beverage, etc.

 Main Features

■Automatic 24-hour on-line filtration, no frequent changing out and cleaning
■No disposable filter media consumption, save filter media cost and environment cost
■Stainless steel scraping blade, good impurity removing performance
■Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap
■Very low pressure drop, stable flowrate, save energy consumption
■Close filtration, no dangerout liquid leakage, good for safe production
■Discharge waste liquid with high impurity concentration, avoid valuable liquid loss

 Main technical parameter

 Model

TPA11

TPA22

TPA34

TPA75

TPA100

TPA136

 Filter area(cm2)

0.11

0.22

0.34

0.75

1.00

1.36

Volume (L)

16

30

50

145

195

320

 Inlet/Outlet (mm)

DN40-DN50

DN50-DN80

DN50-DN100

DN65-DN100

DN80-DN125

DN100-DN150

 Drain outlet (mm)

DN40

DN50

Applicable liquid

 Viscidity (<800000cps) Impurity<1000ppm

 Filtration Precision

20-500μm

Cleaning pressure diff.

0.05MPa

Diff pressure switch

Differential pressure transmitter(DPT) or Differential pressure switch(DPS)

 Gear motor

180W380V, IP55

Filter element type

V-SLOT, 316L/304

Housing material

316L/304/CS

Scraping blade material

304/316L

Seal material

NBR/VITON(FKM)

Discharging valve

Pneumatic ballvalve/ Electric ball valve

 

 

 

TPX Scraping Self-cleaning Filter

 Product Introduction

 TPX series self-cleaning filter (TPX Filter for short), is the high efficiency scraping self-cleaning filter removing the impurities particles on the filter element outside by mechanical scraping, it continuously filters on-line. TPX filter is designed for fine and accurate filtration ranging from20-500 micron. It can avoids extruding and breaking the impurities and is capable of the filtration for water and liquids viscosity up to 800000cps.

Products are widely used in water treatment, papermaking petroleum bio-pharmaceuticals printing ink, grease, food and beverage, etc.

 Main Features

■Automatic 24-hour on-line filtration, no frequent changing out and cleaning
■No disposable filter media consumption, save filter media cost and environment cost
■Stainless steel scraping blade, good impurity removing performance
■Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap
■Very low pressure drop, stable flowrate, save energy consumption
■Close filtration, no dangerout liquid leakage, good for safe production
■Discharge waste liquid with high impurity concentration, avoid valuable liquid loss

Main technical parameter 

 Model

TPX11

TPX22

TPX34

TPX75

TPX100

TPX136

Filter area(cm2)

0.11

0.22

0.34

0.75

1.00

1.36

Volume (L)

16

30

50

145

195

320

 Inlet/Outlet (mm)

DN40-DN50

DN50-DN80

DN50-DN100

DN65-DN100

DN80-DN125

DN100-DN150

 Drain outlet (mm)

DN40

DN50

Applicable liquid

 Viscidity (<800000cps)Impurity<1000ppm

 Filtration Precision

20-500μm

Cleaning pressure diff.

0.05MPa

Diff pressure switch

Differential pressure transmitter(DPT) or Differential pressure switch(DPS)

 Gear motor

180W380V, IP55

Filter element type

V-SLOT, 316L/304

Housing material

316L/304/CS

Scraping blade material

304/316L

Seal material

NBR/VITON(FKM)

Discharging valve

Pneumatic ballvalve/ Electric ball valve

 

 

 

TPB Automatic Back-flushing Filter

Product Introduction

 TPB filters have rigid and durable V-SLOT filter cartridge, with uniform surface crack widthsingle large filter area, precision filtration features, high reliability features. It applies to the filtration of dirty water containing oil sludge type impurities, soft and viscous impurities, high content impurities, small amount of hairs and fibers. It is widely used in water treatment, steel, pulp and paper, mining, petro-chemical, machining, municipal, irrigation etc.

 Main Features

  1. Automatic continuous online filtration.
  2. Large filtration area, low surface flow velocity and low pressure loss.
  3. Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap
  4. High intensity structure, high efficient backwash and time saving.
  5. High reliability system, low operation cost and simple maintenance.

Main technical parameters

 Model

TPB11

TPB22

TPB34

TPB75

TPB100

TPB136

Applicable liquid

 Viscosity(1-40cp)

 Flow rate(m³/h)

17-8000

 Filtration Precision

50-2000μm

Std design P

0.6MPa, 1.0MPa(High design pressure available)

Designed temp.

0-95( Determined by the seal material)

Filter Element

V-SLOT

Housing material

304.316L,CS

 Cleaning Start Mode

Time or Pressure Drop

 

 

 

Diatomite Filter

Product Intorduction

Diatomite filter, also called candle type sealed filter, candle type diatomite filter, tube-type filter press, thickening filter, filter element type self-cleaning filter, cake layer filter.

Inside of the filter are many candle tubes (the tube is Wire-wrapped screen) so as to meet different requirements. There are also some filter cloths outside the tubes which aim to filter liquid and solid. After the filter process, both the filter cake’s drying discharge and the filter cloth’s cleaning could automatically run. The filter could handle large filter area because of its simple structure and no driving device.

Combined with the candle-core patented structure design, the candle type filter enables the shell residue freely discharges. The bottom of the filter doesn’t have any structure; the bottom can be manually, pneumatically and electrically slag; the slag hole is big, so it doesn’t have any effect on batch.

Advantages and Features

  1. Completed enclosed filtering, no leaking and no environmental pollution.
  2. Filter element design is duplex structure (internal metal mesh support plus external filter cloth), has wide application fields and good filter effect.
  3. Filter element is made of food grade stainless steel wedge wire wrapped screen with high roundness and concentricity.
  4. Filter completely only one time.
  5. Clean and dry filter cake to obtain maximum economical benefit.
  6. Gas has been used to against slag, quick ash clean, adapt to a variety of sticky materials.
  7. The whole filtering process can automatically run (according to the automatic setting of pipes).

 Application Range

 Food industry: beer, sugar, glucose decolorization through active carbon filtration; fruit juices, beverages and other wines’ filtering clarification.

Chemical industry: the petrochemical industry, inorganic chemical, organic chemical’s crystal filtration and separation; various of catalyst’s filtration and separation; chemical products’ bleaching and filtration; electrolyte impurity removal; metal degreasing, slag removal and phosphate slag; chemical products’ concentration and thickening etc.

 Main Technical Parameters

 

Area m2

Barrel Diameter (mm)

Working Pressure (MPa)

Working Temperature ()

Nominal Filter Rating (um)

1-120

Ф219Ф300Ф400

Ф500Ф600
Ф800
Ф1000
Ф1200
Ф1400
Ф1600
Ф1800Ф2000

0.4

120
 

1510
15
2540
50
6575
80 
100120…

remark2t/m2

 

TPC Activated Carbon Filter

Product Introduction

Activated carbon is a very fine carbon particles with great microporous in unit area, usually called capillary pore, the capillary has a strong adsorption capacity due to the surface area of the carbon particles, in full contact with impurities in water, these impurities can be adsorbed in the pores. The activated carbon filter is used for color and smell removal and get rid of colloid impurities in water.

 

It is widely used in water pretreatment of household water and food industry, chemical, power and other industries.

Features

 Easy operation, low maintenance

Effective for organic matter, oxide and metal ion

High effectiveness and compact structure

Optional mannual/automatic control

Specifications

      Model No.

 Flow rate (T/H)

Working Pressure

 Operating Temperature

    Water distributor

 Material

               Silica/Carbon

 Column Size (mm)

TPC-8

8

0.1MPa0.6 Mpa

 Normal

(up)(screen mesh)(branch-center) (down) Filter nozzle

SUS304SUS316Q235

1.3T  360KG

Φ900X1500

TPC-10

10

1.6T  450KG

Φ1000X1500

TPC-15

15

2.3T  650KG

Φ1200X1500

TPC-20

20

3T    860KG

Φ1400X1500

TPC-30

30

3.5T  1T

Φ1500X1500

TPC-35

35

4T    1.2T

Φ1600X1500

TPC-40

40

5T    1.5T

Φ1800X1500

TPC-50

50

6T    1.8T

Φ2000X1500

TPC-60

60

7.5T  2.2T

Φ2200X1500

TPC-70

70

9T   2.5T

Φ2400X1500

TPC-75

75

9.7T  2.8T

Φ2500X1500

 

 

 

TPN internal water microfiltration

Product introduction and working principle

The water in the filter is also called rotating decay filter, suitable for use the solid-liquid separation of industrial wastewater, can remove the dirt from the suspended particles is greater than 0.2 mm, Sewage flat cloth evenly into the inside mesh buffer water inlet into the rotating drum, through net tube and the conducting slag spiral rotate, intercept sewage through the other side discharge, the filtered water from screening drum gap discharge.

 Features and Advantages

1. Water distribution uniform increase capacity

2. Simple structure, stable running, easy maintenance, long service life

3.Use the chain transmission, high transmission efficiency

4. With reverse flushing device against the filter clogging

5. On both sides of the belt spill-proof plate to prevent the water splash

 Main technical parameters

 

Model

Tube diametermm

Slot Sizemm

Removal rate

Shape areamm

Grain size >0.75mm

Grain size >037mm

TPLN-600

600

0.2-2

95%

55%

2450x1000x960

TPLN-800

800

3000x1200x1200

TPLN-1000

1000

3400x1350x1250

TPLN-1200

1200

3500x1850x1450

TPLN-1500

1500

3650x1800x1880

 

 

Sieve Bend Screen Filter

The introduction of product

 Sieve Bend Screen Filter is a small-scale unpowered separate equipment, used for processing the suspended solids, floating objects, and sediment, etc… during the sewage treatment. The material of this equipment normally adopt 304 stainless steel, and the gap can be made different size, such as 0.25mm0.5mm0.75mm1.0mm1.5mm2mm, and so on, also can be customized available for detailed requirements.

 operating principle

The main body of Sieve Bend Screen Filter is made by wedge shape steel bar, and process as a arc or flat filter sieve of stainless steel filter flat sifter. After the sewage evenly distribute on the inclined sifter by the down flow weir.

Because of the gap of screen surface is small, smooth, and easy to drain away water, no obstruction; the solid object is retained, the water come through the gap. At the same time, under the water power, the solid object expels from the bottom of the sifting plate, then it can achieve goal for divide the solid and liquid. 

Production Features

1. Take advantage of the gravity of water flow, it has no any energy cost;

2. Water yield dispose is large by single-motor.

3. It will not obstruct, and it is easy to clean.

4. The material of whole set of equipment adopts stainless steel or carbon steel, machinery strength is very high, no deformation and has a life long service.

Typical Applicant Field

1. Paper waste--- recycles the fiber, wipe off the solid content.

2. Tannery waste---- eliminates the fur, grease and other solid contents.

3. Slaughter waste----- eliminates bag, fur, grease, shit and other solid content.

4. Urban sewage--- eliminates fur, debris and other solid contents.

5. Alcohol, starch factory waste---- eliminates the shell of plant fiber, debris and other solid contents.

6. Drug and candy factory waste--- eliminates different kinds of wastes, the shell of plant fiber, and other solid contents.

7. Beer, Malt factory waste----- eliminate malt, bean peel and other solid contents.

8. Livestock, fishing farm waste--- eliminate livestock fur, shit and other solid content.

9. Fish and meat packing plant----- to eliminate gill, scale, dog meat, grease and other solid contents. Also deal with other factories for fiber textile, chemistry, plastic process, large-scale machinery, hotel, residence.

 Technical Data

 

   Model

LS-400

LS-550

LS-700

LS-1000

LS-1400

LS-1700

LS-2000

LS-2300

LS-2700

Sieve plate width (mm)

350

520

650

940

1340

1630

1920

2220

2640

Sieve plate length(mm)

900

900

950

1000

1200

1280

1350

1500

1600

Width (mm)

400

550

700

1000

1400

1700

2000

2300

2700

High (mm)

1200

1250

1300

1380

1500

1550

1650

1700

1900

Inlet (DN)

50

65

80

80

100

125

150

200

250

Outlet (DN)

80

100

125

150

200

250

300

350

250x2

Slot 0.3mm Capacity m3/h

10

20

45

75

100

130

180

250

310

Slot 1.0mm Capacity m3/h

30

50

80

110

180

220

295

360

420

 

TPM Modular Self-cleaning Filter

Product Introduction

TPM Series modular self-cleaning filter (TPM Filter for short) is the automatic filtration system designed by TOP according to the modular design concept. Applicable industries: petrochemical industry, water treatment, papermaking etc.

 Main Features

■ Low risk of downtime, small investment.

■ Without interrupting the filtering case, can maintenance the filter unit off-line one by one.

■ Top quality V-SLOT filter element, accurate slots, extremely smooth, easy to scrap

■ The filter element is very convenient to remove for cleaning

■ Backflushing through the valve switching, no complicated mechanical structure, easy to maintain.

 Main technical parameters:

 Model No  TPM-I Filter  TPM- I I Filter
 Suitable liquid  External solution  External solution or gas
 Viscosity range  <50cps  <100cps
 Impurity content  <300ppm  <300ppm
 Minimum inlet pressure  >0.3MPa  <0.3MPa
 Installation site  after pumping  Before the pump or after
 Filter fineness  50-500um  20-500um
 Standard design pressure  1.6MPa,2.5MPa,4.0MPa  1.6MPa,2.5MPa,4.0MPa

 

 

TPI Sodium Ion Exchanger

Product Introduction

     TPI sodium ion exchanger is using strong acidic resin can absorb the calcium in the waterthe characteristics of magnesium ions to soften water quality, Using salt aqueous solution can make its regenerative recovery principle designed

    TPI series Ion Exchanger is mainly applicable to boilers, thermal power plants, chemical, textile, pharmaceutical, biological, electronics, and atomic energy industry, pure water pre-treatment, industrial water softening, and deionized water preparation, as well as decolorization and purification of foods and drugs, recycling of precious metals and chemical raw materials, and electroplating wastewater treatment, etc.

 Main Features

  1. system center used planar two patents of multi-way valve sealing technology, the body use PVC engineering plastics, corrosion resistancelong life, stable and reliable operation;
  2. full automatic control: Automatic control adopts intelligent microcomputer and PLC program control, it can realize single or dual mode control time and flow regeneration. In addition to salt, full automatic working cycle process.
  3. Equipment in a variety of forms: A single tank valve intermittent water production; Double tank single valve, use a case and a prepare, continuous water making; And tank valve combination, realize the intermittent or continuous water production, meet different occasions where process water;
  4. Adopted floating bed countercurrent regeneration process, the output is big, processing ability, good water quality;
  5. Equipment structure is compact, covers an area of less, simple installation, through in and out of the water pipes, turn on the power supply can be switched on water ;
  6. Exchange of tank structure, technology and unique design; can adapt to the wide scope of water quality, high level of softening hardness of water quality(15 or less tendency for L water hardness) reached the national standard; Resin does not need to scrub in vitro, reduced the operation trouble and loss of resin;
  7. Regeneration into salt, USES the sealing pressure type, pump pressure, salt pond, salt box adopted for salt, a variety of forms, convenient supplement.

 Specifications

 

       Model No.

Capacity

Nominal Recovery

Nominal Salt Rejection

Working Pressure

Operating Temperature

  Voltage

    Weightkg

Sizemm*mm

TPI-2

2T/H

65-75%

99.60%

0.4mpa

5-50     Design Temperature 25

220V/380V/460V, 50-60Hz

300

Φ400×1850

TPI-4

4T/H

450

Φ500×1850

TPI-6

6T/H

480

Φ600×1850

TPI-8

8T/H

580

Φ600×2300

TPI-10

10T/H

600

Φ800×1850

TPI-12

12T/H

620

Φ800×2300

TPI-14

14T/H

750

Φ1000×2100

TPI-16

16T/H

800

Φ1200×2300